The Sea Dragon 1500 uses flat panel COB LED technology to closely mimic natural sunlight, bringing out amazing colors in underwater photos and videos. With a Color Rendering Index of 80 and a color temperature of 5700k, the Sea Dragon 1500 solves the issue of muted underwater photos and videos by giving divers the ability to add color-rich light down to 200 feet/60 meters with this "portable sunlight".
An ultra wide beam
The impressive wide 120-degree beam (90-degree underwater) of the Sea Dragon 1500 ensures maximum lighting coverage and is ideal for cameras with a wide field of view, like the SeaLife Micro HD, Micro 2.0 or GoPro Cameras. With a lab verified lumen output of at least 1500 and a color temperature of 5700k, the light has a 70 minute burn time at full power - the Sea Dragon 1500 is incredibly efficient as well as bright.
Easily expand with Flex-Connect
A Flex-Connect Micro Tray and Grip are included with the light. For those that want to expand an existing set, the light head is also available on its own (Item SL6722). Flex-Connect allows you to quickly and easily transform your camera set from compact to full-featured in just seconds by adding grips, Flex Arms, trays and more with just a "click!"
Powerful 1500 lumen LED light using a single COB LED array technology
One button control for easy operation - one button to power light on/off and select brightness
Three brightness levels: 100%, 50% and 25%
Hidden emergency signal mode: 1 second blink interval and SOS Morse code
70 minute burn time at full power and constant brightness
Depth rated to 200 feet/60 meters - Guaranteed
Easy to expand with Flex-Connect™ trays, grips and Flex Arms, handle, Y-S, ball joint, cold shoe and other accessories
Quick-release button to detach light and aim in crevices and hard to reach areas
120° wide beam angle (90° underwater) evenly illuminates the subject with no hot spots
Corrosion-proof metal light head for heat dispersion and durability
Removable 25W Li-Ion battery w/ charger and international plug adapters included
Waterproof battery compartment - even if the O-ring seal fails, the battery compartment is isolated so water cannot reach the internal electronics
Universal mounting screw fits SeaLife and other brands of underwater cameras w/ standard ¼-20 tripod mount
IN THE BOX:
Sea Dragon 1500 UW Photo-Video Light head
Flex-Connect Micro Tray
Flex Connect Grip
25Wh Lithium Ion rechargeable battery
AC Power Adapter
Int’l plug adapters
O-ring removal tool
Adapter for GoPro Cameras
Sea Dragon 1500 Photo/Video Light Specifications
|Body Material||Anodized aluminum light head with fiber-reinforced polycarbonate body|
|Light Source/Bulb Type||1 x COB LED array (COB - Chip On Board)|
|Brightness||1500 lumens (maintains 1500 lumens throughout burn time at full power)|
|Effective Range||3 ft/1 m (depends on camera model and visibility)|
|Brightness Levels||Full power (100%), half power (50%), and quarter power (25%)|
|Button Control||Long push (1 sec) to power light on/off; Short push cycles through 100% → 50% → 25% → 100% [repeat cycle]|
|Light Modes||Constant light or emergency signal light (activated by long push of power button); one second flash or SOS at full power|
|Color Rendering Index*||80|
|Beam Angle||120 degrees (90 degrees underwater)|
|Battery||Lithium Ion 7.4V, 3400 mAh, 25Wh (included)|
|Battery Charge Time||170 minutes|
|Run Time||70 minutes at full power/140 min at half power/280 min at quarter power|
|Depth||Tested to 200 feet/60 meters|
4.8" x 2.2" x 3.8" (12.2cm x 5.6cm x 9.7cm), head only
|Weight||13.1 ounces (371 grams), head only|
|Bulb Life||35,000 hours|
|O-ring||Dual NBR o-rings (lube included)|
*CRI is a measure of a light source's ability to show object colors "realistically" or "naturally" compared to daylight, which has a CRI of 100 and represents the maximum value.
The beam angles for the Sea Dragon lights are shown as the true, tested “in-air” (above water) beam angle. Underwater, due to light refraction, the angle tightens to approximately 33% less.
Avoid using this Sea Dragon light above water for prolonged periods of time
The light is designed for underwater use and water is needed to displace heat. The metal light head at full power will reach temperature of about 140F (60C) degrees within a few minutes, which may cause burning if touched. A thermal sensor will automatically dim the light if internal temperatures reaches 150F (65C) degrees. Immediately turn off light if any parts of the light become hot to the touch.