State-of-the-art housing for the full-frame mirrorless Nikon Z7?/Z6?/Z7/Z6 camera. Compact, compatible with the Optical YS Converter and ergonomically designed.

Ports and gears for the MDX series SLR housings can be used.
The MDX-Z7?/Z6? is compatible with the system chart for the MDX series SLR housings. You can utilize F-mount lenses with the mount adapter FTZ and ports/gears for the MDX series housings.

Compatible with Optical YS Converter/N1. TTL strobe photography possible.
An optional Optical YS Converter which converts the camera’s hot-shoe TTL signal into an LED light signal is compatible with the housing. Manual strobe photography is also possible.

Designed for both F mount lenses with the mount adapter FTZ and Z mount lenses.
The Focus/Zoom dial has two gears, one for F-mount lenses with the mount adapter FTZ and the other for Z mount lenses. The MDX-Z7 has been designed to take into consideration various Z mount lenses which will soon be available.

The camera’s upper control panel can be seen.
A window for the camera’s upper control panel is also incorporated. As brightness of the camera’s upper control panel has increased, the visibility is now greatly improved.

Features:

• The Port Lock prevents the port from turning or loosening and the Port Lock lever is specifically located to avoid being unlocked accidentally.
  
• The housing is equipped with a lens-lock release button which makes it possible to change lenses easily, without opening the housing.
  
• Pulling out the Focus/Zoom Dial gives sufficient room inside the housing to easily accommodate larger diameter lenses.
  
• The camera’s diopter adjustment dial can be operated from outside the housing. This feature is useful when two or more people with different eyesight use the housing.
  
• All controls have luminescence stickers which glow in dark environment.
  
• Equipped with the Optical Viewfinder 0.5x as standard. Other optional viewfinders such as Optical Viewfinder 0.66x,and 0.8x can be used.
  
• ?Some vignetting occurs. When the VF45 and VF180 1.2x is mounted on housing, the  corners of the camera's viewfinder cannot be viewed due to vignetting. 
  
• Sync Cord 2-pin Connector enables use of conventional hardwired Sync cable (Manual mode only).
  
• Equipped with two sacrificial zinc diodes (one on the front case and the other on the rear) to prevent electrolysis damage.
  
• Equipped with under guard to protect from scratch.
  
• Compatible with Z7 / Z6 cameras by using the included parts